;+----------------------------------------------------------------------
;| Title		: myAVR Beispiel "Hallo Welt" für den ATmega8
;+----------------------------------------------------------------------
;| Funktion		: eine LED wird angeschalten
;| Schaltung	: PORTB0=LED1
;+----------------------------------------------------------------------
;| Prozessor	: ATmega8
;| Takt		: 3,6864 MHz
;| Sprache		: Assembler
;| Datum		: 15.03.2004
;| Version		: 1.0
;| Autor		: Dipl. Ing. Päd. Alexander Huwaldt
;+----------------------------------------------------------------------
.include	"avr.h"
;------------------------------------------------------------------------
;Reset and Interruptvectoren	;VNr.  Beschreibung
begin:	rjmp	main	;1     POWER ON RESET
	reti		;2     Int0-Interrupt
	reti		;3     Int1-Interrupt
	reti		;4     TC2 Compare Match
	reti		;5     TC2 Overflow
	reti		;6     TC1 Capture
	reti		;7     TC1 Compare Match A
	reti		;8     TC1 Compare Match B
	reti		;9     TC1 Overflow
	reti		;10    TC0 Overflow
	reti		;11    SPI, STC Serial Transfer Complete
	reti		;12    UART Rx Complete
	reti		;13    UART Data Register Empty
	reti		;14    UART Tx Complete
	reti		;15    ADC Conversion Complete
	reti		;16    EEPROM Ready
	reti		;17    Analog Comperator
	reti		;18    TWI (I²C) Serial Interface
	reti		;19    Strore Program Memory Ready
;------------------------------------------------------------------------
;Start, Power ON, Reset
main:	ldi	r16,lo8(RAMEND)
	out	SPL,r16
	ldi	r16,hi8(RAMEND)
	out	SPH,r16	;init Stack
	sbi	DDRB,0
;------------------------------------------------------------------------
mainloop:	wdr
	ldi	r16,0b00000001	;LED ON
	out	PORTB,r16
	rjmp	mainloop
;------------------------------------------------------------------------